Hytera two-way radio DMR trunking system

Hytera RD982i

Professional DMR repeater for large radio networks

The Hytera RD982i-S is an impressive digital systems repeater. Supporting conventional analog and digital modes, it can also be used in DMR trunked radio systems (Tier III), and with up to 50W power is responsible for delivering excellent coverage in DMR simulcast and Hytera XPT systems.

Hytera RD-982 DMR trunking repeater two-way radio Fort McMurray

General

Frequency Range
VHF: 136-174MHz UHF1: 400-470MHz UHF2: 450-520MHz UHF3: 350-400MHz
Channel Capacity
16
Digital Protocol
ETSI-TS102 361-1,2 & 3
Supply Voltage
DC +13.6v ± 15%
Battery Backup
YES via PSU
Integral Battery Charging
YES via PSU
Dimensions(W×H×D)
88 x 483 x 366 (mm)
Weight
8.5Kg
Display
2.0” 4 rows 160*128 pixels 262200 colours
Programmable Buttons
4
TX Aerial Connector
N-type socket
RX Aerial Connector
N-type socket
Internal Duplexer
YES using optional mounting kit

Environmental Specifications

Dust & Water Intrusion
IP54 Standard

Features

19″ Rack Mounting
YES (2U required)
Back Pack
NO
Multiple CTCSS/ CDCSS
YES
Repeater Knockdown
YES (Analog & Digital)
IP Ports
1
GPS
NO
Telemetry
YES
IP Site Connect
Digital – YES Analog – YES (R8.5 firmware)
Audio Output for Slot A & B
YES
Remote Programming
YES via IP interface
Remote Diagnostic & Control
Software available
Emergency Mode
NO
Lone Worker
NO
Mandown
NO
Priority Scan
YES
Digital Encryption
Advanced encryption (Hytera or DMRA 128 bits and 256bits AES) available via chargeable licence file.
Multiple Key Encryption Decode
YES
Multilanguage Menu
YES
Power on & off user logo programming
YES
Voice Interrupt
Yes (latest firmware required and Smart Dispatch V4.5.6)
Text Messaging
Yes via application software
Quick Text Messages
Up to 25 pre-programmed via CPS (for telemetry use)
MPT1327 / 1343 Trunking
RD982s Operating mode to be specified with order
Tier 3 Trunking
RD982s only via firmware upgrade
Over-the-Air Programming
NO
Analogue Only Version
Not Available
Number of Sites
16 sites (latest firmware required)
Close Menu